American access system ADV-1000 Betriebsanweisung PDF herunterladen (Seite 376)

100

101

376 WIN-PAK User Guide

2 Individual readers for the panel being configured

are defined on the Reader tab of the SIO Board

Configuration window.

3 Inputs are status points within the system…door

contact inputs, window status inputs, motion

sensors, etc. Panel input points are configured

using the Inputs tab which lists all the input

points available on the current panel.

4 Output points are control points within the

system, such as door locks, parking gates, etc.

5 An ADV must be created for each SIO Board,

and for each input monitor point, output point,

or reader supported by the board.

Refer to "Setting Up Reader Boards" (next section)

for specific procedures to be followed when

configuring a PRO-2200 Intelligent Controller SIO

Board.

The newly defined procedure is shown in the

Procedures list. By expanding the Procedure Actions

tree, you can see a detailed view of each action

defined for this procedure.

Setting Up Reader Boards

The PRO-2200 Series Dual and Single Reader

Modules interface with the Intelligent Controller, to

provide I/O support for card readers. Reader boards

are connected to the PRO-2200 Intelligent

Controller through a supervised RS-485 bus at

38,400 bps.

• The Dual Reader Module provides two Wiegand-

style reader ports, up to eight supervised inputs

and up to six relay outputs.

• The Single Reader Module provides one

Wiegand-style reader port, two supervised inputs

and two relay outputs.

1 2 ... 371 372 373 374 375 376 377 378 379 380 381 ... 776 777

Kommentare zu diesen Handbüchern

Keine Kommentare

American access system ADV-1000 Betriebsanweisung Seite 376

Kommentare zu diesen Handbüchern