American access system ADV-1000 Betriebsanweisung PDF herunterladen (Seite 356)

100

101

356 WIN-PAK User Guide

3 Enter the Controller Address [also known as

the Panel Address]. This corresponds to the DIP

Switch setting on the control panel and falls

within the range of one to eight. See the PRO-

2200 Intelligent Controller Installation Manual

for details.

4 The Host Retry Count is the number of times

the controller will try to make contact with the

panel before sending an alarm indicating it is

offline.

For example, if the Host Retry Count is set to 3

and the DLL receives a bad packet [or does not

get an answer from the Intelligent Controller]

then the DLL will send the packet three more

times.

Host Retry Counts can be set from 2 to 10 [with

3 as the default]. A range of 2 to 4 is recom-

mended for most applications. Retry counts

above 4 would indicate extreme circumstances.

5 The Time to Controller Offline is monitored

and kept within the Intelligent Controller. If the

Intelligent Controller receives neither a poll nor a

message [for example, if it loses communication

with the DLL], it waits the programmed time

then declares that communications with the DLL

have been lost.

The Time to Controller Offline can be set from

10 to 65 seconds [with 15 seconds as the de-

fault]. A range of 10 to 30 seconds is recom-

mended for most applications.

Setup the Panel ADV

6 Set up the default ADV for panel by clicking the

Add button in the ADV area of the window

(upper right corner).

1 2 ... 351 352 353 354 355 356 357 358 359 360 361 ... 776 777

Kommentare zu diesen Handbüchern

Keine Kommentare

American access system ADV-1000 Betriebsanweisung Seite 356

Kommentare zu diesen Handbüchern