American access system ADV-1000 Betriebsanweisung PDF herunterladen (Seite 280)

280 WIN-PAK User Guide

3 Use the Description field to further identify the

panel loop (optional), using up to 60 alphanu-

meric characters.

Loop Verification Interval or ACK/NAK

4 For C-100 Setup: Indicate the Loop Verification

Interval (in seconds). This is the amount of

time between verification attempts. Decreasing

the interval shortens the time until a lost loop is

detected. Increasing the interval improves the

bandwidth. The default of 60 seconds is an

optimum based on experience.

For 485/PCI Multiple Dropline Setup: The

ACK/NAK check box is grayed out, since this

modem pool only accepts non-ACK/NAK 485

panels.

5 Select either or both buffer check boxes [Buffer

all panels on exit and Unbuffer all panels on

startup] to apply buffering instructions.

Select Buffer on Exit to automatically buffer all

panels when the communication server is exited.

Select Unbuffer on Startup to automatically

unbuffer all panels when the communication

server is started.

6 Indicate the Time Zone in which the loop is

located.

Panel Defaults

7 Make any desired adjustments in the Panel

Default settings.

I/O Poll Interval: Defaults to 60 seconds. Sets

the frequency for the signal sent to the panel to

verify communication and check the panel's

input and output states.

1 2 ... 275 276 277 278 279 280 281 282 283 284 285 ... 776 777

Kommentare zu diesen Handbüchern

Keine Kommentare