American access system ADV-1000 Betriebsanweisung PDF herunterladen (Seite 186)

100

101

186 WIN-PAK User Guide

A panel initialization status window will display the

initialization progress. Repeat the procedure for as

many panels as were added to the system. Multiple

panels can be initialized at the same time on an RS-

485 line. If C-100 is being used, initialize one panel

at a time.

If this is the first time the wizard was run and there

were no previously defined WIN-PAK

communication ports, then the communication

server needs to be restarted. Restart the

communication server by stopping it from the WIN-

PAK Service Manager and then start it. An error

indicating that the communication server is not

responding will appear [if the WIN-PAK User

Interface is open]. Click OK. When the

communication server is started, another message

will appear several seconds later indicating that it is

now working. This procedure only needs to be done

once, the first time. All other additions made by the

wizard will become available immediately after the

wizard is finished.

It is normal to receive alarm activities from the panel

during the beginning of the initialization process.

These alarms will be displayed on the Alarm View

window. To acknowledge the alarms, click on the

first event and then hold the shift key down and

select the last event. [You may use the scroll bars to

reach the end of the list.] Then click on Ack, which

will acknowledge the alarms. Use the same process

to select the acknowledged alarms, then click on

Clear to clear the alarms.

Your system is now operational. Refer to the rest of

this manual to learn how to further customize your

WIN-PAK system.

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 776 777

Kommentare zu diesen Handbüchern

Keine Kommentare

American access system ADV-1000 Betriebsanweisung Seite 186

Kommentare zu diesen Handbüchern