American access system ADV-1000 Betriebsanweisung PDF herunterladen (Seite 49)

Speedway Reader IPJ-R1000 for Gen 2 UHF RFID

Parameter Name Format Description

Incompatible

Upgrade/Downgrade

Path |

Incompatible Upgrade/Downgrade Path: Upgrade

failed because upgrading/downgrading to the intended

SOP version or type is not allowed by current image.

Flash Programming

Failed |

Flash Programming Failed: Failed to write the flash

memory.

Flash Programming

Failed |

Flash Programming Failed: Failed to burn the flash.

Current Image

Invalidated |

Current Image Invalidated: The current image has

been invalidated by a previous “fallback” command.

No Fallback Image

Available |

This reason applies to the rejection of multiple

commands following a “fallback” commands.

Generic Error >

Generic Error: Download error other than those

specified above.

PrimaryImageType STRING

The type of image stored in the primary (currently

defaults to Linux)

PrimaryImageSystemVersion STRING

The version string of the primary image system

partition

PrimaryImageConfigVersion STRING

The version string of the primary image configuration

partition

SecondaryImageType STRING

The type of image stored in the secondary (currently

defaults to Linux)

secondaryImageSystemVersion STRING

The version string of the secondary iamge system

partition

secondaryImageConfigVersion STRING

The version string of the secondary image

configuration partition

Following an upgrade command, the UpgradeStatus can take the following values:

• Idle: the reader is not performing any upgrade related activity.

• Contacting Server: the reader is contacting the file server to download either the metafile or the upgrade image file.

• Downloading: the reader is downloading either the metafile or the upgrade image file.

• Download Failed: the download failed.

• No upgrade: the reader does not need to perform an upgrade because one of the following scenarios: (detailed reasons

are given in the command response parameter as listed in Table 7-14)

o The upgrade-mode as specified by the metafile is auto and the image specified by the metafile is no newer

than the current one.

o The upgrade-mode as specified by the metafile is forced and the image specified by the metafile is the same

as the current one.

o The upgrade image file downloaded from the server carries image with the same version as the current one.

o The partition versions specified in the metafile or in the image downloaded are not allowed as a compatible

upgrade/downgrade path.

• Bad Config: the metafile downloaded is invalid due to bad data entry syntax, missing data entries, or other

possibilities.

• Bad Image: the upgrade image file is invalid due to:

o CRC failure in the upgrade image file

o Version numbers not matching those in the metafile that triggered the download of the image

o The image file is corrupted for other reasons

• Erasing: the secondary image is being erased before the new upgrade image is programmed.

• Programming: the new image is being programmed.

Done: the upgrade image has been successfully committed to flash and is ready to be activated. For each abnormal status, a

Reason parameter is given to indicate the reason for the status. The reason values are given in Table 7-14.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 64 65

Kommentare zu diesen Handbüchern

Keine Kommentare

American access system ADV-1000 Betriebsanweisung Seite 49

Kommentare zu diesen Handbüchern