American access system ADV-1000 Betriebsanweisung PDF herunterladen (Seite 29)

Speedway Reader IPJ-R1000 for Gen 2 UHF RFID

> ? config access

config - Submenu of configuration commands.

Usage: config [<subcommand> ...]

access - Changes the password for a given access level.

Usage: config access <level> <password>

<level> is one of: root readonly readwrite (currently only

root is supported)

<password> is any text, please use at least six characters.

Entering the ? between a menu and sub-menu/command will return the usage for all items following the ?. In the example

below, image is a menu that contains commands of its own.

> config ? image factory

image - Submenu of image and upgrade configuration commands.

Usage: image [<subcommand> ...]

factory - Revert to factory defaults.

Usage: image factory

Required parameters are indicated by angle brackets (e.g. <parameter>), while optional parameters are indicated by square

brackets (e.g. [parameter]). At all menus, the exit command or simply ‘.’ will return the user to the previous menu context. To

exit Rshell and terminate the user session (serial, telnet, or SSH), the exit command must be executed from the root menu:

show network> exit

show>

For machine execution, all commands can be called from the root menu. For example:

> show network

show network> dns

is equivalent to:

> show network dns

All commands return data in machine/human readable format.

7.2. Error Codes

The first line of every response has the following format:

Status=errorCode,’error string’

Where errorCode is a numberic value and ‘error string’ is a single-quoted human

readale error code. The error codes are defined in Table 7-1.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 64 65

Keine Kommentare

American access system ADV-1000 Betriebsanweisung Seite 29